GOST 1M Double Disc Concrete Floor Grinder Machine Ride On Concrete Trowel Machine

The Working Principle of Concrete Trowel Seat-Driven Machine​

Ride-on double disc gasoline trowel, this ride-on trowel is easy to operate, and the efficiency can reach 400-500m² in one hour. The grinding disc is used for rough grinding on the ground, and the sharpening knife is used for fine grinding on the ground. The working width is 2 meters. It is simple and easy to operate. One car trowel can reach ten hand-held trowels. There is no problem with working efficiency. , This double-disc ride-on trowel is mainly used for slurrying, compacting, smoothing, and polishing concrete floors.
The first is to confirm that the main gate switch is closed. When the ride-on trowel starts, do not step on the accelerator. You can start by pulling the damper. After the ride-on trowel starts, return the damper to its original position. The left foot cannot step on the flameout switch. Generally, it is stepped on during an emergency stop, pay attention to the first ignition, and the time for the oil pump to pump oil is about 10 seconds.
The gear must be changed when the machine is off. If the gear cannot be engaged, turn the clutch wheel by hand, and then try again. When the machine is running, the accelerator must be completely released. If the gear cannot be engaged, step on the accelerator and then Release it, wait for the idle speed to return to the original position, and try again.
Special attention needs to be paid to turning on the ride-on trowel, and you need to hold the joystick tightly to keep the fuselage balanced. When the ride-on trowel is working, you must hold the ride-on trowel firmly, and it should be done in a time when working on the floor. Adjust the direction to prevent the machine from losing control, and grind first, then finely.

Features of Concrete Trowel Seat-Driven Machine​

1. Greatly reduce labor intensity and provide work efficiency;
2. Double grinding disc construction operation, quick slurry lifting and smoothing, and has a good compaction effect on the ground;
3. Mechanical operating system, infinitely variable speed, sensitive response, comfortable and easy operation;
4. Equipped with the variable-speed operation, high speed, fast finishing, and low-speed operation can make the pulping of the grinding disc powerful, and the construction effect is remarkable;
5. Equipped with a high-power engine, electric start/hand-pull start, and strong power;
6. Equipped with an emergency stop switch, which can quickly shut down the engine to ensure reliable operation;
7. Equipped with LED lighting, convenient for night construction, automatic sprinkler function;
8. Equipped with liftable walking wheels, which are convenient for changing smears, grinding discs, and walking.