Concrete Floor Grinder Floor Polishing Machine Assist System / Grinding Disc

Product: Concrete Floor Grinder Floor Polishing Machine is a high-quality and reliable machine designed to enhance surface flatness and reduce noise. It features an all-aluminum alloy gearbox and gear-driven planetary head, ensuring improved performance. The innovative S-shaped shelf design allows for easy angle adjustment when changing the grinding disc, resulting in more stable grounding. With its power assist system, this machine can be easily moved and carried, significantly saving manpower.

To ensure the proper functioning of the planetary floor grinder, it is essential to follow these preparation steps. Firstly, it must be connected to an electric protector and grounded for safety. The cables should be inspected for any damage, and national standard 8 square meters or above wires should be used. Adjusting the height of the operating handle is crucial to achieve the optimal state of the machine. By pulling the handle down, the entire base can be raised efficiently.

Furthermore, it is vital to check the flexibility of the hand disc's discs and ensure that the fastening bolts are secure. Additionally, the gaps between the discs should be evenly distributed. The bottom of the machine is magnetic, allowing for easy adsorption of the diamond tool or the adapter that absorbs the adhesive resin grinding disc.

Lastly, it is essential to inspect the machine for any potential leaks, ensuring its proper functioning. With its outstanding features and meticulous preparation requirements, the Concrete Floor Grinder Floor Polishing Machine is the ideal choice for professionals seeking a reliable and efficient solution for their polishing and grinding needs.

Description of Planetary Floor grinder
All-aluminum alloy gearbox and gear-driven planetary head reduce noise and improve surface flatness.
The S-shaped shelf design allows for a larger angle to be seen when changing the grinding disc, and the grounding is more stable.
It can be easily moved with a power assist system, is easy to carry, and save manpower.

Preparation for planetary floor grinder

1. Must be connected with an electric protector and earth.

2. Cables must not be damaged or damaged. Wires need to use national standard 8 square meters and above

3. Adjust the height of the operating handle so that the machine can be pulled down to the best state. Pull the handle down and raise the whole base.

4. Whether the discs of the hand disc are flexible, check whether the fastening bolts are loose, and check whether the gaps of the discs are even.

5. The bottom of the machine is magnetic, only need to adsorb the diamond tool or the adapter that absorbs the adhesive resin grinding disc.

6. Check if the machine leaks when lying flat or vertical.

7. Check whether the indicator light ( on the back) is on after powering on and whether the panel parameters are displayed normally.

8. If dry grinding, please connect the vacuum cleaner and connect to the suction port to ensure that the suction pipe has no air leakage. If wet grinding, be sure to full fill the floor with water. Do not only wet the floor to reduce dust, so that the resistance during the flooding process is abnormal and the motor load is overloaded.

9. Turn on the start switch and run from low speed to high speed to see if the machine is running smoothly. The speed is adjusted according to the ground conditions, and the general condition is 800-1800 rpm. Remember not to polish at low speed, especially on extremely poor ground. Low speed may work, but that causes the motor to overheat and burn out.

Parameters of Planetary Floor grinder

250H is outdoor use grinder, equipped with Honda gasolineengine, no power required.Direct connect to the motor, it is easy to operate and durable.popular in Japan and Korea

​

FAQ:
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.

Q2: What is the exact address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.

Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.

Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your equipment.

Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long will it take to arrange production?
A7: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.

Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly welcome.

Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.

Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.

Why you choose us:

1. We are a real factory offering products and providing free technical advice.
2. Company in business for many years and served Over 50 countries' customers.
3. All machines with CE, ISO, and SGS certificates. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.