Round Wedge Anchor For Construction Projects Bridges More Multiholes

Introducing the Multiholes Round Wedge Anchorage, a high-quality building material designed for anchoring and wedge anchoring purposes in construction projects. This versatile product is equipped with multiple features including round anchorage, flat anchorage, prestressed anchor, wedge anchor, anchor bolt, scaffolding, screw, hardware, fastener, construction, and clamp formwork.

Specifically, the Multiholes Round Wedge Anchorage is ideal for anchors used in prestressing concrete during engineering construction projects. It is commonly used in bridge construction, where it is pre-installed and positioned before concrete is poured. The anchorage is then buried at both ends of the concrete, acting as the end faces set for the stability of the jack during tensioning.

To ensure the best performance, it is essential to keep the anchors in good condition, free from rust, water, and other debris. Before use, lubricant should be applied to the outer surface of the tool clip and the inner surface of the taper hole of the anchor plate. Regular maintenance and removal of debris from the surface of the clip is also recommended.

During the tensioning process, safety measures must be taken to ensure the protection of workers. No one should stand near the tensioning jack.

Overall, the Multiholes Round Wedge Anchorage is a reliable and efficient product that is suitable for a range of construction projects. Choose this anchor system for superior performance and safety on your next construction project.

Application description
It is suitable for anchors used for prestressing concrete in the process of engineering construction. Generally used in bridge construction, pre-installed and positioned, and then poured concrete, buried at both ends of the concrete, that is, the two ends of the bellows, which are the end faces set for the stability of the jack during tensioning.

Product parameters

Warm tips
1. The anchors should be kept properly, and there should be no rust, water, and other sundries in use.
2. Apply lubricant on the outer surface of the tool clip and the inner surface of the taper hole of the anchor plate before use, and often remove the debris on the surface of the clip.
3. Safety measures should be taken during tensioning, and no one can stand after the tensioning jack.
4. The anchor system should be used together and cannot be mixed with other systems.

Company Profile
Shaanxi Zhongtuo Mining Equipment Company was founded in 2005 in Xi'an, Shaanxi Province, It is a foreign trade company specializing in the research, development, and sales of machinery and equipment in the fields of mining, bridges, pavements, and tunnels.
With the improvement of high-quality products and good services, our products are trusted and appreciated by customers from all over the world. At present, our customers are all over Russia, Thailand, Romania, Bulgaria, Albania, Colombia, Brazil, Peru, Uruguay, Saudi Arabia, Kuwait, United Arab Emirates, Oman, Turkey, Israel, Kazakhstan, India, and many other countries.

About Certifications
 

FAQ:
Q1: Whether the rig is used for rock holes or soil holes?
A1: Equipped with different drill bits according to the application object. Rock drilling rigs are equipped with round steel drill impact hammers and rock drill bits. The soil drilling rigs require a twist drill pipe and a three-blade drill bit.

Q2: How much tonnage can a bridge jack lift??
A2: The range is from 50 to 1000 tons, depending on the application needs we have the right choice for you.

Q3: How many meters is the connection between the jack and the oil pump?
A3: The factory standard is two meters. If you need longer, we will make it for you.

Q4: What is the difference between the hydraulic oil pump?
A4: For the tension jack, it is a 50 MPa 3 kW oil pump and a 60 MPa 4 kW oil pump.

Q5: What kind of packages does a set of anchors have?
A5: Anchor ring, clip, anchor pad, spiral rib.

Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long is the machine warranty?
A7: One year for the machine and provide technical support according to your needs.

Q8: How long will it take to arrange production?
A8: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.

Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.

Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.