380V 50HZ Rebar Processing Machine 80MPa Rebar Cold Forging Machine

Rebar Processing Machine Rebar Cold Forging Machine

Product Description of  Threading Machine

The rebar connection upsetting cold forging threading machine is mainly used for the construction of ribbed steel bar rolling straight thread head, it is an important equipment of steel bar connection.

The rebar cold forging upsetting machine uses the cold heading principle to make the steel end for plastic deformation, the diameter increased by 4 ~ 6mm, and then processing thread

Technical Parameters of Threading Machine

Features of Threading Machine

1. It can process steel bars with a diameter ranging from 12-40mm.

2. It greatly improves the tensile strength of the joint

3. High efficiency, can produce 300-500 pieces per machine.

4. Environmental protection, safety, economy, and low cost.

Application of Threading Machine
LTDC-36 automatic double-cylinder steel bar roughing machine is to use high pressure to plastically deform the head of the steel bar by cold pressing, increase the diameter, and then process the thread, so that the effective cross-section of the machined thread is higher than the base material of the steel bar, so as to improve the quality of the joint. The compressive and tensile strength of the joint is greater than that of the base material. This machine tool is suitable for the connection of steel bars in bridges, subways, etc.